DIAL - UP LINES







1. HARDWARE NEEDED FOR THE CONNECTION

If you want to be connected with the Central Computer Center within the DIAL - UP lines your PC must have at least one (1) serial port (RS 232 C). Your MODEM can be internal or external, transferring data with a speed of at least 2400 bps. The communication programs can be Telix, Procomm etc. In the setup of the communication program you will use, you should state the following parameters, as they are given below.

DATA BITS

8

STOP BITS

1

PARITY

NONE

COMMUNICATION

FULL DUPLEX (FDX)



In the following table are provided the telephone numbers and the attributes of the type of MODEM the C.C.C. provides.






PHONE NUMBERS

7722463 Undergraduates 7722468 Stuff - Graduates
7722469 Stuff - Graduates 77722464 Stuff - Graduates
7722465 Stuff - Graduates 7722470 Stuff - Graduates
7722466 Stuff - Graduates 7722471 Stuff - Graduates
7722467 Stuff - Graduates 7722475 AUTODROP





MODEM'S TYPET I

MULTI - TECH MT 1432BAIMULTI - TECH MT 1432BAI

MAX VELOSITY

14400 bps

COMPATIBILITY

V.42 bis, V.42, V.32, V.21, V.22 bis, V.22, V.23, V.25 bis

ERRORS CORRECTION

V.42 (LAP-M / MNP 3 & 4)

COMPRESSION OF DATA

V.42 bis (4:1) / MNP 5 (2:1)

*At the end of your task please ------- the MODEM, in order to make it available for other users.

3. PROBLEMS - FURTHER INFORMATION

For any problems that may arise or for further information concerning the communication through MODEM, you can contact Mr. S. Glabedakis or S. Nikitas, tel. 7722447.